High Quality ASTM B265 Titanium(Ti) Plate Application In Industry

Titanium plate thickness deviation is allowed
thickness (mm) Allowable thickness tolerance (mm)
(3.71 to 4.76), excl 0.36
3.33 to 3.68 0.31
2.92 to 3.30 0.25
2.51 to 2.90 0.23
2.13 to 2.49 0.20
1.85 to 2.11 0.18
1.50 to 1.83 0.15
1.04 to 1.47 0.13
0.69 to 1.02 0.10
0.43 to 0.66 0.08
0.20 to 0.41 0.05
0.15 to 0.18 0.04
0.13 0.03

Hot working condition (R)

Cold working condition (Y)

Annealing state (M)

Titanium plate features

1. Titanium seed plate is the surface of the oxidation film equivalent to a good wear resistance hair separation agent, the use of titanium seed plate to save the separation agent, the plate is easy to peel, avoid the process of pre-treatment of the plate, titanium seed plate is half lighter than copper seed plate.

2. The service life of titanium seed plate is more than 3 times that of copper seed plate, which can reach 10 to 20 years according to operating conditions

3. The electrolytic copper prepared with titanium seed plate has compact crystal structure, smooth surface and excellent quality.

4. Since the titanium seed plate does not need to be coated with separators, the contamination of copper electrolyte can be avoided.

5. Increase the production capacity to reduce the production cost of electrolytic copper, so as to have better economic benefits.

 

Description

Description

Titanium Plate

American standard : GR1、GR2、GR3、GR5、GR7、GR12

National standard : TA0、TA2、TA3、TA5、TA6、TA7、TA9、TA10、TB2、TC1、TC2、TC3、TC4

Titanium plate specification

Brand TA1、TA2、TA3、TC4、GR1、GR2、GR5
Standard GB/T 3621-2007、GB/T 13810-2007、ASTM B265、ASTM F136、ASTM F67
Size T 0.5-5.0mm x W1000mm x L 2000-3500mm、T 6.0- 30mm x W1000-2500mm x L 3000-6000mm、T 30- 80mm x W1000mm x L 2000mm
Uses Metallurgy、electronics、medical、chemical、petroleum、medicine、aerospace、etc.

Titanium plate manufacturing process

Hot forging : A forging process that takes place above the recrystallization temperature of a metal.

Hot rolled : A process of rolling at temperatures higher than recrystallization.

Cold rolled : A rolling process in which the plastic deformation temperature is lower than the recovery temperature.

Annealing : A metal heat treatment process in which the metal is slowly heated to a certain temperature, held for sufficient time, and then cooled (usually slowly, sometimes controlled) at an appropriate rate.

Pickling : immersing the product in an aqueous solution such as sulfuric acid to remove oxide and other films on the metal surface.It is the pretreatment or intermediate treatment of electroplating, enamel, rolling and other processes

Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit