Titanium Round Rods With High Purity、High Quality And Reasonable Price For Sales

Technical requirements

1: the chemical composition of titanium and titanium alloy bar shall comply with the provisions of GB/T 3620.1. When repeated inspection is required, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.

2: the diameter or side length of the hot working bar and its allowable deviation should meet the requirements of table 1.

3: the allowable deviation of the diameter of cold-drawn bar after hot processing by turning (grinding) the rod and cold rolling shall conform to the provisions in table 2.

4: the roundness of the rod after hot processing shall not be greater than half of its dimensional tolerance.

5: the length of the working rod shall be 300-6000mm, the length of the annealed rod shall be 300-2000mm, the length of the fixed rod or double rod shall be within the range of the fixed rod length. The allowable deviation of the fixed rod length shall be +20mm.The length of the double ruler shall also be included in the cutting volume of the bar, and each of them shall be 5mm. The length of the fixed ruler or double ruler shall be specified in the contract.

Instructions

Brand Manufacturing process   Delivery status   Diameter(mm) Execution standard
TA1、TA2、TA9、TA10 Hot forging (polishing) RM 6-200 GB/T2965-2007
TC1、TC2、TC3、TC4 Hot forging (polishing) RM 6-200

Titanium rod production status : Hot working condition (R)、Cold working condition (Y)、Annealing state (M)

Titanium rod manufacturing process : Hot forging – hot rolling – finishing (polishing)


Description

Description

Titanium rod production brand.

National standard : TA1、TA2、TA3、TA7、TA9、TA10、TC4、TC4ELI、TC6、TC9、TC10、TC11

American standard : GR1、GR2、GR3、GR5、GR7、GR12

Titanium rod implementation standard.

American standard : ASTM B348、ASTM F136、ASTM F67、AMS4928

National standard : GB/T2965-2007、GB/T13810、Q/BS5331-91

Diameter: 5~350mm

Length:max 6000mm

Technique: Cold Rolled, hot rolled

Shape: round rod, square rod, hexagonal rod

Surface: pickling surface, polished surface, sand blasting surface

Certification: ISO,EN10204 3.1,EN10204 3.2

Chemical Composition

    Designation            No. Ti Al V Zr Ni Fe Si C N H O others
Gr2 Reminder / / / / o.15 0.1 0.05 0.03 0.015 0.15 0.3
Gr3 Reminder / / / / 0.3 o.15 0.1 0.05 0.015 0.2 0.3
Gr4 Reminder / / / / 0.4 0.15 0.1 0.05 0.015 0.3 0.3
Gr5 Reminder 5.5~6.75 3.5~4.5 0.8~2.0 0.3 0.15 0.1 0.05 0.015 0.2 0.3

 

Tensile Test

Designation No. Size[mm] Condition Tensile  Strength [M Pa] Yield Strength  0.2% [M Pa] Elongation [%] Reduction of area[%]
ELT
Gr1 8~75 M 280 170 24 30
Gr2 8~75 M 370 250 20 30
Gr3 8~75 M 440 320 18 30
Gr4 8~75 M 540 410 15 25
Gr5 8~50 M 895 825 10 25
Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit